LED Strip Light Connector for 10mm Width Tape Light

The need for this LED strip light connector arises from the limitations of traditional LED strip light connector designs. The traditional connector structures are often unreliable, making the light prone to flashing or turning off with even minor movements. This can lead to the strip light breaking apart, requiring the purchase of individual LED wires. These issues make traditional connectors unsuitable for end-user applications.

MSDUSA's design of this LED tape light connector addresses these problems, making it easy for end consumers, electricians, and DIY enthusiasts to use. Before purchasing this connector, it is important to check the PCB width and waterproof rating of your LED strip light. This connector is compatible with 10mm-wide SMD2835/5050/3014/5060 LED strip lights and 8mm/10mm-wide COB LED strip lights. It is suitable for non-waterproof (IP20/IP44) and silicone-glued waterproof (IP65) applications, but not for 8mm-wide SMD2835/5050 RGB color-changeable LED strip lights.

Using this 2-pin solderless LED connector is straightforward: 1. Cut off the LED strip light from one roll. 2. Remove the 5mm-long 3M tape from the back of the strip light. 3. Plug in the LED strip light and screw it down tightly. 4. Plug in the household cable or LED wire and screw it down, paying attention to the positive and negative polarity. 5. Power on the light to check if it turns on (if not, tighten the screws further). 6. Secure the LED connector with 3M tape on the bottom. 7. Optionally, secure the LED connector with a screw through the provided hole. 8. Place the protective cover to avoid accidental contact by children.

To connect two LED strip lights (suitable for corners or long-distance connections): 1. Plug in both LED strip lights and screw them down. 2. Plug in the wire at both connectors and screw them down.

The electrical parameters of this connector are: Working Voltage: 5 - 24VDC Max Amperage: 5V-4A, 12V-6A, 24V-6A Input Wire Range: 14AWG-22AWG, max 2.2mm diameter (inner single wire)

Included accessories: 3M adhesive tape and fixing screws. Working Environment: Indoor, Ambient Temperature: -4°F to 122°F (-20°C to 50°C) Material: Polycarbonate Color: Transparent

This LED strip light connector offers high reliability, as moving the LED strip light or the connectors does not cause the light to flash or turn off, making it suitable for use in fish houses and boats.

The broad compatibility with various wire gauges (14AWG, 16AWG, 18AWG, 20AWG, 22AWG, 2-pin white/black AC wire, and 3-pin AC wire) allows for convenient integration.

The patented design combines the features of traditional SMD 3528, 5050, 2835, and COB LED strip light PCBs, achieving a 95% compatibility for different LED strip lights.

The transparent color of the connector makes it almost imperceptible, allowing for easy visual inspection of the LED tape's positioning.

The multiple mounting options, such as the ability to install the tape light connectors into LED aluminum profiles or PVC LED channels, eliminate the need for welding, further enhancing the versatility of this product.

product information: