LED Strip Connectors for 10mm Non-waterproof and IP65 Waterproof Strips

This LED strip light connector is designed to address the shortcomings of traditional LED strip light connectors. The traditional design often lacks reliability, making the lights prone to flickering or turning off with minor movements, and requiring the purchase of separate LED wires when the strip is broken. These issues make traditional connectors unsuitable for end-users.

MSDUSA has developed this LED tape light connector to solve these problems, making it easier for end consumers, electricians, and DIY enthusiasts. Before purchasing this connector, it is essential to verify the width of your LED strip light PCB and the waterproof rating.

This connector is compatible with 10mm wide SMD2835/5050/3014/5060 LED strip lights and 8mm/10mm wide COB LED strip lights. It is suitable for non-waterproof (IP20/IP44) and silicone-glued waterproof (IP65) applications, but not for 8mm wide RGB color-changeable SMD2835/5050 LED strip lights.

Using this 2-pin solderless LED connector is straightforward:

1. Cut the LED strip light from one roll.
2. Remove the 5mm long 3M tape from the back of the strip light.
3. Plug in the LED strip light and tighten the screws to ensure a secure connection.
4. Plug in the household cable or LED wire and tighten the screws, paying attention to the polarity (+/-).
5. Power on the light to check if it turns on. If not, tighten the screws further.
6. Secure the LED connector with the included 3M tape on the bottom.
7. Optionally, fix the LED connector with the included screw.
8. Place the protective cover to prevent accidental contact by children.

To connect strip lights over longer distances or around corners, simply:

1. Plug in the LED strip lights and tighten the screws on both connectors.
2. Plug in the wires at both connectors and tighten the screws.

The electrical parameters of this connector are: - Working Voltage: 5 - 24VDC - Max Amperage: 5V-4A, 12V-6A, 24V-6A - Input Wire Range: 14AWG-22AWG, Max 2.2mm diameter (inner single wire)

The included accessories are 3M adhesive tape and a fixing screw.

The working environment for this connector is indoor, with an ambient temperature range of -4°F to 122°F (-20°C to 50°C). The connector is made of polycarbonate and has a transparent color design.

The key advantages of this LED strip light connector are: - No soldering required - simply plug in the strip and wire, then tighten the screws. - Reusable and suitable for both home and commercial applications. - Compatible with a wide range of LED strip lights, including 5V, 12V, and 24V SMD 5050, 2835, 5630, 2216, and COB LED tape lights. - Transparent design allows for easy inspection of the inner structure and LED tape positioning. - Includes safety features, such as the transparent cover to prevent electric shocks. - Versatile mounting options with the included 3M tape and screws, allowing installation in various locations, such as aluminum profiles, channels, bedrooms, living rooms, kitchens, cabinets, and display shelves.

product information: